Manufacturers
Bear Creek Engineering is an analog consulting group that develops complete products or modules from conception, through circuit design, to fabrication and testing of prototypes. Bear Creek’s broad expertise includes low noise amplifier design, data acquisition, high voltage design, and optoelectronics.
Bear Creek designs products for commercial and aerospace applications. Typical projects designed by Bear Creek include:
A transimpedance amplifier used to measure photocurrents below 1 pA.
An H-bridge motor driver for a commercial appliance.
Optical power control loops for solid-state lasers.
DC-coupled voltage amplifiers with SNR approaching theoretical Johnson noise limits.
AC-coupled voltage amplifiers with nonlinearity less than 1 ppm.
A 2 kV power supply with less than 1 uVrms ripple.
Components Corporation is the global leader of test points and wireform products. For over 60 years, they have been supporting applications world-wide.
In addition to having extensive PCB, silver plated and tin matte test points for every application, Components Corp also makes preform jumpers and hardware, battery contacts, and printed circuit card edge connectors.
Since all of their products are RoHS and REACH compliant, the medical, security, and industrial electronics industries turn to the expertise of Components Corp for their application requirements.
Whether test points are needed in sample quantities or large production quantities, it is always readily available from their large inventory at the factory or through their extensive distribution network.
East Electronics, formerly known as MynTahl, is a leading mfr of acoustic components. Their factory is located in Ningbo, China and they have a US sales office in Fremont, CA.
East Electronics products are buzzers (sounders), speakers, microphones and receivers. East Electronics also has experience in custom acoustic modules where the buzzer and speaker are combined. East Electronics products are ISO9001, ISO14001, and TS16949 certified.
East Electronics is your acoustic component supplier for medical, home automation, auto and other applications. Great customer service, exceptional design support.
For more than 50 years, Gowanda has been a leading manufacturer of board-level magnetic inductive components for the OEM electronics marketplace. Located in Gowanda, NY, most of Gowanda’s products are made in the USA.
Gowanda Electronics has grown and expanded to become Gowanda Components Group. Over the past few years, Gowanda has acquired multiple magnetic and filter manufacturers in order to offer more solutions to their customers.
Gowanda’s strengths include space flight products, where they are certified to do all testing in-house to Mil-Std-981 and EEE-INST-002 standards. Gowanda is also a leader in conical inductors for broadband microwave applications. And Gowanda brings multiple products for medical applications including non-magnetic inductors.
Gowanda has incredible engineering support available and should be the first choice for custom applications.
ITG Electronics is a leading manufacturer of magnetics and EMI filters. Established in 1963, ITG has several sales and support locations in the US. ITG also has multiple engineering and manufacturing locations.
ITG Electronics offers types of inductors such as flat wire, drum, molded, and toroidal. Some of ITG’s other magnetic components included chokes, power beads and transformers.
Because of the high current and low DCR characteristics on ITG inductors, server, storage and CPU applications are a primary focus.
Steri-Tek is the newest and most state-of-the-art E-beam and X-ray irradiation sterilization, material modification, and R&D collaboration facility in North America. Steri-Tek is located in Fremont, CA.
Steri-Tek is an ISO 11137 and ISO 13485 certified, FDA registered, DEA registered as well as State of California Medical Device and Drug Manufacturing licensed facility serving the medtech, biotech, pharmaceutical and other industries.
The facility boasts two state-of-the-art 10 MeV, 20 KW linear accelerators, using simultaneous beam processing that allows for high volume production, providing uniform dose to the product without having to rotate the customer’s boxes. This DualBeam™ configuration significantly increases efficiencies, expands product options, and serves as an effective back-up for the accelerators. The facility will provide the most 10 MeV sterilization capacity, the most comprehensive product options, and the highest uptime availability than any other facility in North America.
Steri-Tek offers a seamless dose map validation of customer’s product from any other contract irradiator. Our staff of validation engineers will provide expert consultation for setting up any products to be dose mapped. We also offer turnkey sterilization validations for any new products to be introduced into the market at some of the most competitive rates.
YC Cable is an established and experienced custom cable and wire harness assembly manufacturer, and has been in this business since 1985. YC Cable supports low-volume production from their factory in Fremont, CA. High-volume production is done in Taiwan and China.
YC Cable’s existing client base support the General, Automotive, Medical Device, Defense and Aerospace Industries. We are ISO, TS16949 certified and comply with IPC-620 workmanship standards.
YC Cable manufactures computer, RF, fiber-optic and consumer electronic cables. YC Cable also has much experience supplying military and defense cables and assemblies.
Zierick Manufacturing has been in business for over 95 years and is a leading source of solutions for complex interconnection requirements and problems. Zierick serves numerous markets with emphasis on Industrial Controls, Automotive, HVAC, Solid State Lighting, Medical and Security.
Zierick's products fall into 3 main categories: wire-to-board connectors, board-to-board connectors, interconnection hardware (terminals, test points, fuse clips, etc). All of these products have both SMT and thru-hole options.
Many of Zierick’s newer products are unique and designed for specific applications. Example: their wire-to-board connectors were designed for lighting industry where multiple boards need to be connected by wire.
Please check out Zierick’s website which has many design and application information. Samples are readily available as well. Please contact AEG for any requests.